SHIPPING TO  US FOR YOUR MT82 BUILD

When shipping to Calimer's Transmissions you have a few ways of doing it.  The Cheapest and easiest is our customer build shipping package.  You can also follow our at home shipping procedure below.

When shipping your MT82 to our facility, from your 2011 and up mustang, follow these simple steps and it will get to us safely and efficient. 

  • Step 1

You will need a 50 gallon plastic tote to put your transmission in. You can find them at your local Lowes or Home Depot.          CLICK FOR TOTE

You will need a piece of plywood cut to fit the bottom of the tote ( around 32"x16").

Use ratchet straps and secure your transmission to the piece of plywood and put it in the tote. 

                       CLICK FOR RATCH STRAPS

Toteshiping3.jpg
  • Step 2

Write us a note with your:

  • Name

  • Addresses

  • Phone Number​

  • What you want done to your transmission

And place that note in the tote!

toteshipping4.jpg
  • Step 3

Place the lid on the tote and secure it tight with zip ties.

At this point you are ready to take your transmission to your local FedEx

SHIP IT TO US AT:

30 Walnut ST.

WAYNESBORO, PA 17268

Toteshiping2.jpg
CORE MT82 
RETURN

When you are ready to send us  your core MT82 for a Core Refund follow these simple steps.

  • Step 1

Drain all of the oil!

Place the old core MT82 back into the crate your new Calimer built transmission came in.  Make sure to place it the same direction and all bolts are tightened.

DO NOT ADD ANYTHING EXTRA TO THE CRATE!