Break down of Calimer’s MT-82 Transmission

 

Stage 1, 2 & 3 and frequently asked questions.

​

Stage 1:

• Bronze shift pads

• Billet shift rail stop

• New carbon fiber synchro's, seals, bearings, etc.

​

-Customer supplied trans starts at $975 plus any broken or damaged gears are additional cost. Plus, the cost of return shipping. Average cost is $1200-$1400 for most units with typical damage. 

 

-Pre-built Stage 1:
Prebuilt Stage 1  Approximate turn around is typically 1-2 weeks until this product ships.

Due to supply shortages this product may take 6-8 weeks to ship.

​

Calimer's Transmissions recommends an Organic style clutch for our Stage 1 and 2's!

 

Stage 2:

• Bronze shift pads

• Billet shift rail stop

• New carbon fiber synchro's, seals, bearings, etc.

• Micro polishing

 

-Customer Supplied Trans starts at $1875 plus any broken or damaged gears are additional cost. Plus, the cost of return shipping. Average cost is $2200 for most units with typical damage. Approximate turn around is 2 weeks.

​

-Pre-built Stage 2:
Prebuilt Stage 2  Approximate turn around is typically 1-2 weeks until this product ships.

Due to supply shortages this product may take 6-8 weeks to ship.

​

Calimer's Transmissions recommends an Organic style clutch for our Stage 1 and 2's!

 

Stage 3:

• Bronze shift pads

• Billet shift rail stop

• New carbon fiber synchro's, seals, bearings, etc.

• Micro Polishing

• Plus a billet gear-set produced by G-Force specifically for Calimer's Transmissions.

• No other stage 3 MT82 has the power handling capability of this stage 3. It is rated to 1000hp 900tq. The stage 3 is offered in 26 spline input shaft. Our 26 spline input shaft is 54% stronger and highly recommended. The stage 3 has set pricing if the customer sends in a transmission.

• ​

-Our Calimer Built Stage 3's gear ratio is.        GEAR    RATIO

                                                                                  1ST        3.46 

                                                                                 2ND        2.29

                       OSS Count Is 24 Tooth                   3RD       1.61

                                                                                 4TH        1.26

                                                                                 5TH        1.0

                                                                                 6TH       .61

 

-Customer Supplied Trans $3875 plus return shipping. Approximate turn around is 4-6 weeks.

​

-Pre-built Stage 3:
Prebuilt Stage 3 Approximate turn around is typically 1-2 weeks until this product ships.

Due to supply shortages this product may take 6-8 weeks to ship.

​

Note: There will be a slight whine with the Stage 3 due to the tooth profile of the gears. They are helical cut so they are not as loud as a straight cut gear but they still produce some noise.

​

You will need a tune revision for our gear ratios in our Stage 3!

​

**We recommend to use only Amsoil 75-90 Transmission and Transaxle Fluid GL4 in all of our MT-82 transmissions! We always have oil in stock for purchase. 

​